{"title":"Saws","description":"\u003cp\u003eCordless circular saws, slide miter saws, reciprocating saws and hand saws from Makita, HiKOKI and more.\u003c\/p\u003e","products":[{"product_id":"makita-40vmax-125mm-rechargeable-circular-saw-black-hs005gzb","title":"Makita 40Vmax 125mm Rechargeable Circular Saw (Black) HS005GZB","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eExperience the fastest cutting speed in its class with this high-performance saw, designed for efficiency and precision. According to a 2020 Makita survey, this saw cuts twice as fast as comparable AC machines. It features two drive modes to suit different tasks: \"Speed Mode\" for high-speed rotation under light loads and \"Finishing Mode\" for constant speed control, ensuring clean cut surfaces. The low noise level makes it ideal for remodeling sites and interior work.\u003c\/p\u003e\n\n\u003cp\u003eThe saw is equipped with a separate cutting base and sub-base, which can be removed for edge cutting. It boasts a dustproof and waterproof protection rating of IP56, although this does not guarantee complete malfunction prevention. The \"AFT\" kickback recoil reduction, highly rigid depth guide, and parallelism fine-adjustment mechanism further enhance its performance.\u003c\/p\u003e\n\n\u003cp\u003eThis saw operates on a 36V (40Vmax) sliding type Li-ion battery, which is sold separately along with the charger. The saw blade dimensions are 125 mm in outer diameter and 20 mm in inner diameter, and it comes with a premium white chip saw. The maximum depth of cut is 47 mm at 90°, with rotation speeds of 6,000 RPM in Speed Mode and 4,500 RPM in Finishing Mode. On a single charge (with BL4025), it can cut approximately 260 pieces of 2 x 10 material (38 mm thick x 235 mm wide).\u003c\/p\u003e\n\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Saw blade dimensions: O.D. 125 mm, I.D. 20 mm\u003cbr\u003e\n- Maximum depth of cut: 47 mm (at 90°)\u003cbr\u003e\n- Rotation speed: Speed mode 6,000 RPM \/ Finishing mode 4,500 RPM\u003cbr\u003e\n- 1-charge work capacity (approximate\/with BL4025\/cutting): Approx. 260 pieces (2 x 10 material\/thickness 38 x width 235 mm)\u003cbr\u003e\n- Machine dimensions: L 263 x W 185 x H 246 mm\u003cbr\u003e\n- Weight: 2.8 kg (including BL4025)\n\u003c\/p\u003e\n\n\u003ch2\u003eStandard Accessories\u003c\/h2\u003e\n\u003cp\u003e\n- Shark skin premium white chip saw\u003cbr\u003e\n- Note: Battery, charger, and case are sold separately\n\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45117207380131,"sku":"20244589","price":35000.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-40vmax-125mm-rechargeable-circular-saw-black-hs005gzb-292585.jpg?v=1724417294"},{"product_id":"hikoki-36v-circular-saw-c3605da-125mm-aggressive-green","title":"HIKOKI Multi Volt C3605DA(SK)(NN) Brushless 125mm Circular Saw Body only","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Black Orchids power tool comes standard with a Kuroshachi accessory and boasts the fastest cutting speed in its class at 7,000 rpm, as of May 2021 among domestic power tool manufacturers. This high-speed performance ensures that work gets done faster than ever before. The tool features a new parallelism-adjustable link structure that allows for smooth raising and lowering of the base, improved soft-start feeling, and reduced recoil. Additionally, it has reduced grating gear noise and smooth operation due to the integrated base.\u003c\/p\u003e\n\n\u003cp\u003eThe motor and battery mounting area are designed to be flat, providing stable operation even when the main unit is laid on its side for saw blade replacement. The soft material on the ground surface helps prevent damage to the workpiece. The tool operates with low noise and high motor efficiency. It automatically switches to normal power mode when the motor load becomes heavy, allowing for smooth cutting according to the cutting conditions. The motor speed is monitored for changes, and if the speed drops rapidly due to the saw blade being pinched, the motor instantly stops to reduce kickback movement.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n  \u003cstrong\u003eSaw Blade:\u003c\/strong\u003e Outer diameter: 125 mm, Hole diameter: 20 mm\u003cbr\u003e\n  \u003cstrong\u003eMaximum Depth of Cut:\u003c\/strong\u003e 47 mm at 90°, 30 mm at 45°\u003cbr\u003e\n  \u003cstrong\u003eRotation Speed:\u003c\/strong\u003e 7,000 rpm (power mode), 3,500 rpm (silent mode)\u003cbr\u003e\n  \u003cstrong\u003eStandard Accessories:\u003c\/strong\u003e Chip saw black or orca (45 blades), Hexagonal wrench\n\u003c\/p\u003e","brand":"HiKOKI","offers":[{"title":"Default Title","offer_id":45117226549411,"sku":"20244590","price":39000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/hikoki-multi-volt-c3605dasknn-brushless-125mm-circular-saw-body-only-263405.jpg?v=1724416547"},{"product_id":"makita-40vmax-125mm-rechargeable-maruonoko-black-battery-charger-and-case-sold-separately-hs007gzb","title":"Makita HS007GZB 40Vmax 125mm Cordless Circular Saw, 47mm Cut Depth, Black, Body Only (No Battery or Charger)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HS007GZB is the black, body-only version of the HS007G, a 125 mm cordless circular saw made by Makita Corporation of Anjo, Aichi, Japan, for its 40Vmax lithium-ion range. The \"GZB\" code comes with Makita's Samehada Premium White tipped saw blade and a hex wrench, but without battery, charger, battery cover or case. The HS007G has a one-piece aluminium base without a step, which Makita calls its general base, and two drive modes chosen with a button. Speed mode runs at 6,000 min-1 and changes automatically between high speed under light load and high torque under heavy load; Makita names long plywood flooring boards as an example. Finish mode holds a constant 4,500 min-1 for a clean cut face on thick material such as decorative boards. Makita says that holding the speed constant also lowers noise, and presents finish mode as suited to renovation and interior work. Makita states that its HS005G to HS008G series has the fastest cutting speed among 125 mm circular saws (as of July 2020, Makita's own research), and that it cuts about twice as fast as Makita's own 125 mm AC model (Makita's test material: Merapi, 45 mm thick x 300 mm wide). The HS007G has no wireless-linked dust collection (AWS); Makita offers that function on the HS008G.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Maker: Makita Corporation, Anjo, Aichi, Japan\u003cbr\u003e\n- Model code: HS007GZB (HS007G series, body only, black; the blue version is HS007GZ)\u003cbr\u003e\n- JAN \/ UPC barcode: 088381731270\u003cbr\u003e\n- Battery platform: Makita 40Vmax lithium-ion, DC 36 V (Makita notes that 40Vmax is the battery voltage at full charge). Makita lists BL4020, BL4025, BL4040 and BL4040F as the recommended batteries for this model, and its 2026-7 general catalog (p.16) marks the HS005G to HS008G series as unable to use 5.0 Ah and 8.0 Ah batteries. Makita's figures below use BL4025 (2.5 Ah)\u003cbr\u003e\n- In the box (HS007GZB, per Makita): Samehada Premium White tipped saw blade A-67175 (125 mm, 35 teeth, body 0.9 mm, kerf 1.4 mm, bore 20 mm) and hex wrench 5. No battery, no charger, no battery cover, no case. The parallel guide is a separately sold item for this model (part No. 164095-8)\u003cbr\u003e\n- Motor: DC brushless\u003cbr\u003e\n- No-load speed: speed mode 6,000 min-1 (rpm); finish mode 4,500 min-1 (rpm)\u003cbr\u003e\n- Blade: outer diameter 125 mm, bore 20 mm; usable blade diameter 119-125 mm\u003cbr\u003e\n- Maximum cutting depth: 47 mm at 90 degrees; 30 mm at 45 degrees; 40 mm at 5 degrees left\u003cbr\u003e\n- Bevel range: -5 to 45 degrees (Makita's notation; the 5-degree side is the left bevel)\u003cbr\u003e\n- Base: one-piece aluminium base without a step (Makita's general base)\u003cbr\u003e\n- Dimensions: length 263 mm x width 185 mm x height 246 mm, with BL4025 fitted\u003cbr\u003e\n- Weight: 2.7 kg with BL4025 fitted\u003cbr\u003e\n- Work per charge with BL4025 (Makita reference value; varies with the wood and the sharpness of the blade): about 260 cuts in SPF 2 x 10 lumber (38 x 235 mm) with the Samehada Premium White blade\u003cbr\u003e\n- Dust and water protection: IP56 with the battery fitted, plus Makita's APT design. Makita notes that products with an IP rating are designed to resist the effects of dust and water, but this is not a guarantee against failure\u003cbr\u003e\n- Kickback reaction reduction (AFT): the saw detects a sudden drop in speed, for example when the blade is pinched, and stops automatically. Makita notes that this function does not prevent kickback itself\u003cbr\u003e\n- Other functions listed by Makita: mode lamp that flashes as an overload warning, two LED lights, blower, soft start, brake, high-rigidity depth guide for smooth depth adjustment, fine adjustment of parallelism, dust-extractor connection with a separately sold dust nozzle (part No. 194202-9)\u003cbr\u003e\n- Wireless-linked dust collection (AWS): not available on this model (HS008G only)\u003cbr\u003e\n- Chargers (none included): Makita's manual lists DC40RA, DC40RB, DC40WA and DC40WB for this model, and gives the DC40RA's input as single-phase AC 100 V, 50-60 Hz, 310 W\u003cbr\u003e\n- Other 125 mm Makita blades listed for this model: A-60012 (55 teeth), A-50500 (42 teeth) and others in Makita's manual\u003cbr\u003e\n- Source: Makita's HS007G product page, the HS007G\/HS008G instruction manual, Makita's July 2020 product release and the Makita general catalog (2026-7)\n\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eThe HS007G is a hand-held 125 mm circular saw, and its included Samehada blade is Makita's blade for laminated timber and general wood. Within Makita's figures it cuts up to 47 mm deep with the blade square and 30 mm at a 45-degree bevel, and Makita quotes its work-per-charge figure on SPF 2 x 10 lumber (38 x 235 mm). Makita's manual describes speed mode for cutting light-load material briskly and finish mode for work where the finish of the cut face matters; the selected mode stays set when the switch is released or the battery is removed. For rip cuts the manual says to always use a parallel guide, which is sold separately for this model. Makita advises against using or leaving the tool where there is heavy dust, under water or in the rain. Material thicker than 47 mm cannot be cut through in one pass; Makita's 165 mm 40Vmax model HS002G cuts up to 66 mm. This is the body-only version: a Makita 40Vmax battery and a charger have to be sourced before it can be run. Makita's instruction manual for this model is published in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45345676886179,"sku":"20245785","price":35000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-40vmax-125mm-rechargeable-maruonoko-black-hs007gzb-866636.jpg?v=1729612195"},{"product_id":"makita-rechargeable-handy-saw-18v-battery-and-charger-sold-separately-muc101dz","title":"Makita Rechargeable Handy Saw 18V battery and charger sold separately MUC101DZ","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e  \n\u003cp\u003eThis handheld cutting tool is designed for trimming garden trees, fruit trees, and woodworking tasks. It offers the convenience and ease of use of a hand saw while delivering powerful cutting performance. The tool is equipped with an automatic chain oil lubrication system, ensuring smooth operation without the need for manual lubrication. Additionally, the chain tension can be adjusted automatically by simply loosening and retightening the lever, making maintenance quick and hassle-free. Powered by a high-performance brushless motor, this compact and lightweight tool provides professional-grade cutting capabilities. The guide bar length is 100mm, making it ideal for precision work. Safety features include a hand guard for protection and a movable guard that adjusts with the depth of the cut. The tool is also designed to be drip-proof and dustproof, enhancing durability in various working conditions.\u003c\/p\u003e  \n\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e  \n\u003cp\u003e- Guide Bar Length: 100mm  \n- Chain Speed: 480 m\/min  \n- Chain Type: 80TXL-26E  \n- Blade Specification: Thin blade 80TXL with a gauge thickness of 1.1mm and a pitch of 0.325\"  \n- Power Source: 18V DC, slide-type Li-ion battery (battery and charger sold separately)  \n- Approximate Working Volume Per Charge: Approximately 440 pieces of 50mm flint (figures may vary based on battery charge and working conditions)  \n- Machine Dimensions: L 408 mm x W 90 mm x H 249 mm (including chain blade, guide bar, and battery)  \n- Weight: 1.9 kg (including chain blade, guide bar, and battery)\u003c\/p\u003e  \n\n\u003ch2\u003eUsage\u003c\/h2\u003e  \n\u003cp\u003eThis tool is perfect for trimming garden trees, pruning fruit trees, and performing woodworking tasks. Its compact and lightweight design ensures outstanding maneuverability, making it easy to handle for both professional and DIY users. The automatic lubrication and chain tension adjustment features simplify operation, while the high-power brushless motor ensures efficient and fast cutting performance.\u003c\/p\u003e  \n\n\u003ch2\u003eSafety Features\u003c\/h2\u003e  \n\u003cp\u003e- Hand Guard: Protects the user's hand during operation.  \n- Movable Guard: Covers the upper part of the guide bar and adjusts according to the depth of the cut.  \n- Drip-Proof and Dustproof Design: While the tool is designed to minimize the effects of water and dust, it is not guaranteed to be completely resistant to malfunctions caused by these elements.\u003c\/p\u003e  \n\n\u003ch2\u003eAdditional Features\u003c\/h2\u003e  \n\u003cp\u003e- Thin Blade Design: The 80TXL thin blade significantly reduces cutting resistance, providing a sharp bite for faster and smoother cutting.  \n- Compact and Lightweight: Despite its small size, the tool delivers full-scale cutting performance, making it ideal for precision tasks and extended use without fatigue.\u003c\/p\u003e  ","brand":"Makita","offers":[{"title":"Default Title","offer_id":45465647579299,"sku":"20246178","price":29500.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-rechargeable-handy-saw-18v-battery-and-charger-sold-separately-muc101dz-969248.jpg?v=1734405477"},{"product_id":"makita-rechargeable-marinoko-18v-blade-diameter-165mm-depth-of-cut-66mm-battery-charger-and-case-sold-separately-hs631dzs","title":"Makita HS631DZS 18V 165mm Cordless Circular Saw, 66mm Cut Depth, with Samehada Blade, Body Only (No Battery or Charger)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Makita HS631DZS is the body-only, blue version of the HS631D, an 18 V cordless circular saw for 165 mm blades made by Makita Corporation of Anjo, Aichi, Japan. The \"DZS\" code comes with Makita's Samehada Premium White tipped saw blade (A-64353), a hex wrench and a parallel guide; battery, charger and case are sold separately. Makita calls the HS631D a deep-cut model for jobs from formwork through timber pre-cutting to interior finish carpentry. It cuts up to 66 mm deep with the blade square, 46 mm at a 45-degree bevel and 55.5 mm at a 5-degree left bevel.\u003c\/p\u003e\n\u003cp\u003eThe saw has a high-power DC brushless motor. Makita states that the HS631D has power equal to its own AC model and a high speed of 5,000 rpm (Makita's comparison is with its AC 100 V model). For the Samehada blade, Makita states that a newly developed special printing technology, applied to both faces, lowers friction resistance by about 1\/4, and that with a cordless circular saw it raises work per charge by about 50 percent compared with Makita's earlier Laser Double Slit blade A-48533. Makita's reference figures with a BL1860B battery are about 217 cuts in 50 x 300 mm Douglas fir with the Samehada blade and about 145 cuts with a Double Slit blade.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cdiv class=\"shopify-spec-table-wrapper\" style=\"margin: 20px 0; overflow-x: auto;\"\u003e\n  \u003ctable class=\"shopify-spec-table\" style=\"width: 100%; border-collapse: collapse; font-size: 14px; color: #333; border: 1px solid #e8e8e8;\"\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth colspan=\"2\" style=\"background-color: #f7f7f7; text-align: left; padding: 12px 15px; font-weight: bold; border-bottom: 2px solid #e1e1e1;\"\u003e\n          Makita HS631DZS 18V 165mm Cordless Circular Saw (with Samehada Premium White Tipped Saw Blade) Specifications\n        \u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"width: 35%; background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Maker \/ Model\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; line-height: 1.6;\"\u003e\n          Makita Corporation (Anjo, Aichi, Japan)\u003cbr\u003e\n          HS631DZS: HS631D series, blue, body only, with Samehada blade (the black body-only version is HS631DZSB)\u003cbr\u003e\n          JAN: 088381854566\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Power Source\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; line-height: 1.6;\"\u003e\n          DC 18 V, Makita 18 V slide-type lithium-ion battery (not included)\u003cbr\u003e\n          Motor: DC brushless motor\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Blade Size (mm)\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8;\"\u003e\n          Outer Diameter: 165 \u003cspan style=\"font-size: 12px; color: #666;\"\u003e(Usable blade diameter: 155–165)\u003c\/span\u003e\u003cbr\u003e\n          Inner Diameter (bore): 20\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Max Cutting Depth (mm)\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; line-height: 1.6;\"\u003e\n          at 90°: 66\u003cbr\u003e\n          at 45°: 46\u003cbr\u003e\n          Bevel Left 5°: 55.5\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Bevel Range\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8;\"\u003e\n          0–45° right, 0–5° left\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          No Load Speed (min\u003csup\u003e-1\u003c\/sup\u003e)\u003cbr\u003e\u003cspan style=\"font-size: 12px; color: #666; font-weight: normal;\"\u003e[RPM]\u003c\/span\u003e\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; vertical-align: middle;\"\u003e\n          5,000\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Work per Charge\u003cbr\u003e\u003cspan style=\"font-size: 12px; color: #666; font-weight: normal;\"\u003e(Makita reference values)\u003c\/span\u003e\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; line-height: 1.6;\"\u003e\n          BL1860B (6.0 Ah), Douglas fir 50 × 300 mm:\u003cbr\u003e\n          about 217 cuts with the Samehada Premium White blade\u003cbr\u003e\n          about 145 cuts with a Double Slit blade\u003cbr\u003e\n          \u003cspan style=\"font-size: 12px; color: #666;\"\u003eMakita notes that results vary with the condition of the wood and the sharpness of the blade.\u003c\/span\u003e\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Dimensions (mm)\u003cbr\u003e\u003cspan style=\"font-size: 12px; color: #666; font-weight: normal;\"\u003e(L × W × H)\u003c\/span\u003e\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; vertical-align: middle;\"\u003e\n          286 × 192 × 258\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Net Weight (kg)\u003cbr\u003e\u003cspan style=\"font-size: 12px; color: #666; font-weight: normal;\"\u003e(with battery)\u003c\/span\u003e\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; vertical-align: middle;\"\u003e\n          3.0 \u003cspan style=\"font-size: 12px; color: #666;\"\u003e(Makita's specification battery: BL1860B)\u003c\/span\u003e\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Included\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; line-height: 1.6;\"\u003e\n          Samehada Premium White tipped saw blade A-64353 (165 mm, 45 teeth, body 1.0 mm, kerf 1.5 mm, bore 20 mm)\u003cbr\u003e\n          Hex wrench 5 (783203-8)\u003cbr\u003e\n          Parallel guide\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"background-color: #fcfcfc; padding: 12px 15px; font-weight: bold; border-bottom: 1px solid #e8e8e8; vertical-align: top;\"\u003e\n          Not Included\n        \u003c\/td\u003e\n        \u003ctd style=\"padding: 12px 15px; border-bottom: 1px solid #e8e8e8; line-height: 1.6;\"\u003e\n          Battery, charger and case\u003cbr\u003e\n          Batteries listed by Makita for this model: BL1815N, BL1820B, BL1830B, BL1850B, BL1860B\u003cbr\u003e\n          Charger named in Makita's manual: DC18RF\u003cbr\u003e\n          Makita states that battery adapters cannot be used with this model.\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-power brushless motor; Makita states power equal to its own AC model and a high speed of 5,000 rpm (compared with Makita's AC 100 V model).\u003c\/li\u003e\n\u003cli\u003eAutomatic mode change: the saw switches between a high-speed mode and a high-torque mode according to the load; the mode lamp lights in high-torque mode.\u003c\/li\u003e\n\u003cli\u003eSamehada Premium White blade included: both faces treated; Makita states friction resistance about 1\/4 lower through a special printing technology, and work per charge about 50 percent higher with a cordless circular saw compared with Makita's earlier Laser Double Slit blade A-48533.\u003c\/li\u003e\n\u003cli\u003eCompact body from a revised battery position and the brushless motor, with a balance Makita designed to make the saw easy to hold level.\u003c\/li\u003e\n\u003cli\u003eParallel-guide fixing knob: holds the parallel guide firmly without scratching its surface.\u003c\/li\u003e\n\u003cli\u003eParallelism fine adjustment: keeps the side of the base and the blade accurately parallel.\u003c\/li\u003e\n\u003cli\u003eSmooth depth adjustment: the angle guide is a separate part from the base, so the saw body rises and lowers smoothly.\u003c\/li\u003e\n\u003cli\u003eBlower that clears chips from the marking line during the cut.\u003c\/li\u003e\n\u003cli\u003eRear chip ejection, which Makita states reduces scattered chips.\u003c\/li\u003e\n\u003cli\u003eAdjustable depth stopper that keeps a set cutting depth.\u003c\/li\u003e\n\u003cli\u003eRear notch for checking the marking line.\u003c\/li\u003e\n\u003cli\u003e5-degree left bevel: Makita's manual describes cutting the ends of flooring boards at about 2–5 degrees so they fit against a wall or baseboard, which makes the flooring easier to lay.\u003c\/li\u003e\n\u003cli\u003eLED light, brake (applies when the trigger is released), soft start and battery indicator lamp.\u003c\/li\u003e\n\u003cli\u003eAluminium base.\u003c\/li\u003e\n\u003cli\u003eConnects to a Makita dust extractor with the optional dust nozzle set (part No. 196995-4).\u003c\/li\u003e\n\u003cli\u003eOptional hanging hook set (part No. 198041-9).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eMakita names formwork, timber pre-cutting and interior finish carpentry as the HS631D's field, and the 66 mm depth lets stock up to that thickness be cut through in one pass with the blade square. The included Samehada blade is Makita's blade for laminated timber and general wood. Makita's manual also lists other 165 mm blades with a 20 mm bore as separately sold items, including A-64369 (Samehada, 55 teeth), A-49367 (52 teeth), A-55821 (55 teeth) and A-55809 (72 teeth); use only blades of 155–165 mm with a 20 mm bore.\u003c\/p\u003e\n\u003cp\u003eMakita's manual asks users to mount the blade with its arrow pointing the same way as the arrow on the saw, set the cutting depth to suit the workpiece so that the blade shows below it, fix the workpiece on a stable support instead of holding it by hand or foot, and use the parallel guide for rip cuts. Makita does not list wireless-linked dust collection (AWS) for the HS631D. This is the body-only version: a Makita 18 V slide-type lithium-ion battery and a charger are needed to run it. Makita's instruction manual for this model is published in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45465971064995,"sku":"20246190","price":40700.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-18v-cordless-circular-saw-hs631dzs-165mm-blade-66mm-cut-depth-tool-only-591865.jpg?v=1734405476"},{"product_id":"olfa-craft-saw-precision-cutting-tool-125b","title":"OLFA Craft Saw Precision Cutting Tool 125B","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThis is a fine-tooth saw with a replaceable blade design, engineered to deliver smooth and precise cutting edges. Its versatile construction makes it ideal for cutting a variety of materials, including plastic, wood, bamboo, and PVC pipe. The saw is designed for convenience and efficiency, making it a practical tool for both DIY enthusiasts and professionals who require clean, accurate cuts.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Blade Type: Replaceable, fine-tooth\u003cbr\u003e\n- Grip Material: ABS resin\u003cbr\u003e\n- Blade Material: SK-95 steel\u003cbr\u003e\n- Compatible Blade: Craft saw blade\u003cbr\u003e\n- Suitable Materials: Plastic, wood, bamboo, PVC pipe\n\u003c\/p\u003e","brand":"OLFA","offers":[{"title":"Default Title","offer_id":45808508633251,"sku":"20251694","price":1498.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/olfa-craft-saw-precision-cutting-tool-125b-913575.jpg?v=1745895531"},{"product_id":"makita-18v-cordless-reciprocating-saw-jr189dz-no-battery-charger-case","title":"Makita 18V Cordless Reciprocating Saw JR189DZ (no battery\/charger\/case)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eHigh power with low vibration in a compact one-hand reciprocating saw. A brushless motor delivers fast cutting up to 3,100 strokes per minute, while a counterweight mechanism reduces vibration for better control. Tool-less blade change—just push to install. Built-in LED work light with pre-glow and afterglow. Water- and dust-resistant design; not waterproof or dustproof.\u003c\/p\u003e\n\u003cp\u003ePower: DC 18V slide-type Li-ion battery (battery and charger sold separately). Stroke length 22 mm; variable speed 0–3,100 spm. Cutting capacity: pipe up to 130 mm OD; wood up to 255 mm thick with a 300 mm blade. Estimated work per charge: approx. 110 cuts in 2x10 lumber; approx. 40 cuts in steel pipe (34 mm diameter x 3 mm wall). Dimensions: 410 x 81 x 182 mm; weight: 2.5 kg (with battery).\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":46445069172899,"sku":"20254842","price":27880.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-18v-cordless-reciprocating-saw-jr189dz-no-batterychargercase-8308644.jpg?v=1761278442"},{"product_id":"makita-cordless-slide-miter-saw-18v-165mm-blade-182mm-cut-width-ls610dz","title":"Makita LS610DZ 18V 165mm Cordless Slide Miter Saw, 182mm Cut Width, Body Only (Battery and Charger Sold Separately)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Makita LS610DZ is the body-only code of the LS610D, a 165 mm cordless slide miter saw for Makita's 18 V lithium-ion battery range, made by Makita Corporation of Anjo, Aichi, Japan. The Z code comes without battery, charger or battery cover. Makita's catch line for the LS610D is \"high rigidity and high precision\", and its own infographic names four reinforced points: higher rigidity in the front arm and in the arm, a larger slide-pole diameter and a thicker guide fence. The slide structure does not change the saw's depth, 495 mm in the stored position, which Makita presents as what lets the saw be used close to a wall. The blade tilts 45 degrees to the left and to the right, plus 1 degree more on each side with the 46-degree switching lever. Makita says the two-way tilt lets you make bevel cuts without turning the workpiece over, and that the extra degree is handy when butting interior materials such as baseboards. The turn base has a fine-adjustment knob for the miter angle. Makita fits the saw with an ink-line laser that can be set to either side of the blade, an LED light, and a brushless motor that switches automatically between a high-speed mode and a high-torque mode according to the load, and supplies it with its Samehada Premium White tipped saw blade, part No. A-69244. The LS610D supports Makita's wireless-linked dust collection (AWS), which needs the separately sold wireless unit WUT01 (part No. A-66151) fitted to the saw and an AWS-compatible Makita dust extractor.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Maker: Makita Corporation (Anjo, Aichi, Japan)\u003cbr\u003e\n- Model code: LS610DZ (LS610D, body only)\u003cbr\u003e\n- JAN code (Makita): 088381889087\u003cbr\u003e\n- Power: 18 V DC lithium-ion battery, not included. Makita's specifications are based on the BL1860B (6.0 Ah); Makita's manual lists BL1815N (1.5 Ah), BL1820B (2.0 Ah), BL1830B (3.0 Ah) and BL1860B (6.0 Ah) as optional batteries for this model\u003cbr\u003e\n- Charger: not included. Makita's kit code LS610DRG comes with the DC18RF charger; Makita's manual gives its rated input as single-phase AC 100 V, 50\/60 Hz, 330 W\u003cbr\u003e\n- Motor: DC brushless, with automatic mode change (high-speed mode \/ high-torque mode) and a mode lamp\u003cbr\u003e\n- No-load speed: 5,000 min-1 (rpm)\u003cbr\u003e\n- Blade size: outer diameter 165 mm, bore 20 mm; usable blade diameter 155-165 mm\u003cbr\u003e\n- Included blade: Samehada Premium White tipped saw blade for table and slide saws, A-69244, 165 mm, 60 teeth, body 1.4 mm, kerf 1.9 mm, bore 20 mm, for laminated and general wood\u003cbr\u003e\n- Cutting capacity, blade at 0 degrees (height x width): 46 x 182 mm with the turn base at 0 degrees; 46 x 127 mm at 45 degrees left or right; 46 x 98 mm at 57 degrees right. With a backing board: 55 x 150 mm (20 mm board), 55 x 100 mm (15 mm board), 55 x 80 mm (10 mm board)\u003cbr\u003e\n- Cutting capacity, blade tilted 45 degrees left: 30 x 182 mm (turn base 0 degrees), 30 x 127 mm (turn base 45 degrees left or right); with a backing board 36 x 150 mm (20 mm), 36 x 100 mm (15 mm)\u003cbr\u003e\n- Cutting capacity, blade tilted 45 degrees right: 15 x 182 mm (turn base 0 degrees), 15 x 127 mm (turn base 45 degrees left or right); with a backing board 20 x 150 mm (20 mm), 20 x 100 mm (15 mm)\u003cbr\u003e\n- Turn base range: 0 to 47 degrees left, 0 to 57 degrees right, with a turn-base angle fine-adjustment knob\u003cbr\u003e\n- Blade tilt range: 0 to 45 degrees left and right; 46 degrees with the 46-degree switching lever\u003cbr\u003e\n- Dimensions: depth 495 mm x width 400 mm x height 470 mm\u003cbr\u003e\n- Weight: 10.2 kg with a BL1860B battery fitted\u003cbr\u003e\n- Work per charge with BL1860B (Makita reference values; they vary with blade sharpness): about 250 cuts in Merapi 40 x 180 mm; about 400 cuts in flooring 12 x 180 mm\u003cbr\u003e\n- Standard accessories (LS610DZ, per Makita's manual): saw blade A-69244, vertical vise, hex wrench 5, hex wrench 2.5, triangle ruler, dust bag. No battery, charger or battery cover\u003cbr\u003e\n- Functions listed by Makita: brushless motor, automatic mode change, ink-line laser, LED light, electronic control, brake, dust-extractor connection, wireless-linked dust collection (AWS) with separately sold items\u003cbr\u003e\n- Optional Makita blades listed in the manual for this model: A-50809 (165 mm, 64 teeth, laminated and general wood), A-50762 (165 mm, 64 teeth, general wood), A-48474 (165 mm, 60 teeth, aluminium sash)\u003cbr\u003e\n- Specifications from Makita's LS610D product page, instruction manual and general catalog\n\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eMakita developed the LS610D for interior finish carpentry on apartment and condominium construction and renovation sites, where tools are carried from site to site; its 2019 release describes a compact saw that is easy to carry and to work with close to a wall. Clamp the workpiece against the guide fence with the vertical vise and cut within Makita's stated capacities: up to 46 x 182 mm with the blade and the turn base at 0 degrees, or 55 x 150 mm on a 20 mm backing board. The laser line can be set to the left or right side of the blade to line up with the marked cut line. Makita's manual says to cut only aluminium, wood or similar materials, to use a blade suited to the material (Makita lists A-48474 for aluminium sash), never to fit an abrasive cut-off wheel, and never to look into the laser beam. When carrying on with a spare battery, Makita asks that the saw be rested for 15 minutes or more. This is the body-only code: a Makita 18 V lithium-ion battery and a charger are needed to run it. Makita's instruction manual for this model is published in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":46461012803747,"sku":"20254986","price":99360.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-cordless-slide-miter-saw-18v-165mm-blade-182mm-cut-width-ls610dz-8719570.jpg?v=1761725369"},{"product_id":"makita-40vmax-125mm-cordless-circular-saw-blue-hs007gz","title":"Makita HS007GZ 40Vmax 125mm Cordless Circular Saw, 47mm Cut Depth, Blue, Body Only (No Battery, Charger or Case)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe HS007GZ is the body-only, blue version of the HS007G, a 125 mm cordless circular saw made by Makita Corporation of Anjo, Aichi, Japan, for its 40Vmax lithium-ion range. Makita supplies the HS007GZ without a battery, charger, battery cover or plastic case. It comes with Makita's Samehada Premium White tipped saw blade (125 mm, 35 teeth, part No. A-67175) and a hex wrench. The saw has a brushless motor and two drive modes, selected with a button. Speed mode changes speed automatically, running at up to 6,000 rpm under light load and giving more torque under heavy load; Makita suggests it for fast cuts in long stock such as floor plywood. Finish mode holds the blade at a constant 4,500 rpm. Makita says the constant speed gives a clean cut face and lower noise, and recommends it for thick decorative boards and for renovation and interior work. Makita states that the HS007G cuts about twice as fast as its own 125 mm AC circular saw. Makita rates the tool IP56 for dust and water protection when the battery is fitted, and rates the 40Vmax battery IP56 as well. It adds that IP-rated products are designed to resist the effects of dust and water but are not guaranteed against failure, and that the saw should not be used or left in heavy dust, under water or in the rain. Other features Makita lists: AFT kickback reaction reduction, which detects a sudden drop in blade speed and stops the saw (Makita notes that it does not prevent kickback itself); a rigid depth guide for smooth depth adjustment; fine adjustment for blade parallelism; a one-piece aluminium base with no step (Makita's \"general base\"); two LED lights; a blower; soft start; and a brake. The HS007G does not support Makita's wireless-linked dust collection (AWS). Makita offers that only on the sister model HS008G.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaker: Makita Corporation, Anjo, Aichi, Japan\u003c\/li\u003e\n\u003cli\u003eModel code: HS007GZ (HS007G, body only, blue). The black body-only version is HS007GZB\u003c\/li\u003e\n\u003cli\u003eJAN \/ UPC barcode: 088381728379\u003c\/li\u003e\n\u003cli\u003eMotor: DC brushless\u003c\/li\u003e\n\u003cli\u003ePower: DC 36 V (40Vmax). Makita notes that 40Vmax is the battery voltage at full charge\u003c\/li\u003e\n\u003cli\u003eBatteries Makita lists for this model (not included): BL4020 (2.0 Ah), BL4025 (2.5 Ah), BL4040 (4.0 Ah), BL4040F (4.0 Ah). Makita's general catalog marks this series as not usable with its 5.0 Ah and 8.0 Ah batteries\u003c\/li\u003e\n\u003cli\u003eChargers Makita lists for this model (not included): DC40RA, DC40RB, DC40WA, DC40WB\u003c\/li\u003e\n\u003cli\u003eNo-load speed: speed mode 6,000 min-1 (rpm) with automatic speed change; finish mode 4,500 min-1 (rpm) with constant-speed control\u003c\/li\u003e\n\u003cli\u003eBlade: outer diameter 125 mm, bore 20 mm; usable blade diameter 119-125 mm\u003c\/li\u003e\n\u003cli\u003eMaximum cutting depth: 47 mm at 90 degrees; 30 mm at 45 degrees; 40 mm at 5 degrees left\u003c\/li\u003e\n\u003cli\u003eBevel range: -5 to 45 degrees (Makita's notation; the 5-degree side is the left bevel)\u003c\/li\u003e\n\u003cli\u003eBase: one-piece aluminium base (\"general base\")\u003c\/li\u003e\n\u003cli\u003eDust and water protection: IP56 for the tool with the battery fitted, and IP56 for the battery; APT. Makita states that this is not a guarantee against failure\u003c\/li\u003e\n\u003cli\u003eWireless-linked dust collection (AWS): not available on this model (HS008G only)\u003c\/li\u003e\n\u003cli\u003eDust extractor connection: with Makita's separately sold dust nozzle set 194202-9\u003c\/li\u003e\n\u003cli\u003eWork per charge (Makita reference value): about 260 cuts in SPF 2x10 lumber (38 x 235 mm) with the Samehada blade and a BL4025 battery\u003c\/li\u003e\n\u003cli\u003eDimensions: length 263 mm x width 185 mm x height 246 mm, with BL4025 fitted\u003c\/li\u003e\n\u003cli\u003eWeight: 2.7 kg with BL4025 fitted\u003c\/li\u003e\n\u003cli\u003eIn the box (HS007GZ, per Makita): Samehada Premium White tipped saw blade A-67175 (125 mm, 35 teeth, 0.9 mm body, 1.4 mm kerf, 20 mm bore), hex wrench 5 (783203-8). No battery, no charger, no battery cover, no case. The parallel guide (164095-8) is sold separately\u003c\/li\u003e\n\u003cli\u003eOther 125 mm blades Makita lists for this model: A-60012 (55 teeth), A-50500 (42 teeth), A-48125 (42 teeth), A-45010 (24 teeth), A-48197 (36 teeth), A-36946 (42 teeth), A-40630 (42 teeth)\u003c\/li\u003e\n\u003cli\u003eSource: Makita's HS007G product page, the HS007G\/HS008G instruction manual and the Makita general catalog (2026-7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eThe HS007G is a hand-held circular saw. Its included Samehada blade is Makita's blade for laminated and general wood. By Makita's figures it cuts up to 47 mm deep with the blade square, 30 mm at a 45-degree bevel and 40 mm at a 5-degree left bevel. Makita suggests speed mode for fast cuts in long stock such as floor plywood, and finish mode for thick decorative boards and for jobs where a clean cut face and lower noise matter. Makita's manual says to set the cutting depth so the blade can be seen below the workpiece; to use only blades of the size, shape and bore it specifies (119-125 mm outer diameter, 20 mm bore) and never a blade whose root diameter is 102 mm or less; and to always use the parallel guide for rip cuts. The parallel guide (164095-8) is not in the HS007GZ box. This is the body-only version, so you will need a Makita 40Vmax battery and a compatible Makita charger to run it.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":46505240297635,"sku":"20253826","price":45780.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-40vmax-125mm-cordless-circular-saw-blue-hs007gz-5023016.jpg?v=1762935133"},{"product_id":"makita-10-8v-cordless-reciprocating-saw-tool-only-jr104dz","title":"Makita 10 8V Cordless Reciprocating Saw (Tool Only) JR104DZ","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eCompact 10.8 V slide-battery reciprocating saw with multi-position switch for flexible handling and compatibility with both reciprocating saw and jigsaw (Type B) blades. Equipped with LED work light and variable speed control for precise cutting in various materials.\u003c\/p\u003e\n\u003cp\u003eModel: JR104DZ\u003cbr\u003eWeight: 1.3 kg (including battery)\u003cbr\u003eStroke rate: 0–3,300 strokes\/min\u003cbr\u003eSize: 376 mm (L) x 66 mm (W) x 186 mm (H)\u003cbr\u003eCutting capacity – Pipe: up to 50 mm outer diameter; Wood: up to 50 mm thickness\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":46706594119843,"sku":"20260036","price":15380.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-10-8v-cordless-reciprocating-saw-tool-only-jr104dz-1265813.jpg?v=1767316387"},{"product_id":"makita-18v-cordless-reciprocating-saw-jr187dz-tool-only","title":"Makita 18V Cordless Reciprocating Saw JR187DZ (Tool Only)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eHigh-performance reciprocating saw delivering cutting speed and power comparable to AC models, featuring a vertical crank design and durable brushed motor.\u003c\/p\u003e\n\u003cp\u003eCutting capacity (with 300 mm blade): pipe up to 130 mm, wood up to 255 mm. Stroke rate: low speed 0–2300 min-1, high speed 0–3000 min-1. Stroke length: 32 mm.\u003c\/p\u003e\n\u003cp\u003eTool dimensions (L × W × H): 439 × 83 × 231 mm – compact yet powerful for demanding professional and DIY cutting tasks.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47375885140131,"sku":"20261038","price":34980.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-18v-cordless-reciprocating-saw-jr187dz-tool-only-8339308.jpg?v=1772500942"},{"product_id":"makita-190mm-cordless-slide-compound-miter-saw-40vmax-tool-only-ls008gz","title":"Makita LS008GZ 40Vmax 190mm Cordless Slide Miter Saw, 312mm Cut Width, Body Only (Battery and Charger Sold Separately)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe LS008GZ is the body-only version of the LS008G, a 190 mm cordless slide miter saw made by Makita Corporation of Anjo, Aichi, Japan, for its 40Vmax lithium-ion range. Makita supplies the LS008GZ without battery or charger. With the blade and the turn base at 0 degrees, Makita gives a cutting capacity of 312 mm wide by 62 mm high in one pass, and describes it as a one-shaku cut with a 190 mm blade (the shaku is a traditional Japanese unit of length, about 30.3 cm). The slide poles sit on the right side of the saw, which Makita says keeps the marking line easy to see. Makita rates the cutting speed of its high-power brushless motor at about 2.5 times that of Makita's own 190 mm AC model, measured on Merapi wood 300 mm wide by 50 mm thick. Constant-speed control holds the speed under heavy load, which Makita says gives a clean cut surface.\u003c\/p\u003e\n\u003cp\u003eFor accuracy, Makita names three points: upper and lower linear ball bearings in the slide, slide poles 25 mm in diameter, and an arm stiffened with added ribs. The blade tilts 45 degrees to the left and to the right, plus 1 degree more on each side (46 degrees with the 46-degree switching lever); Makita notes the extra degree is useful for butting baseboards and other interior materials. The slide structure keeps the same depth while the head slides, 649 mm in the stored position, which Makita presents as the reason the saw can be used close to a wall. The bevel lock grip, the turn-base lock grip and the turn-base release lever are all at the front of the saw, so the blade tilt and the turn base are locked from one place, and a sub table stored in the base steadies wide boards such as flooring. Makita gives the weight as 12.0 kg with a BL4025 battery fitted. The saw has a laser for lining up the cut with the marking line, which can be set on either side of the blade, an LED light, electronic control and a brake, and comes with Makita's Samehada tipped saw blade for table and slide saws.\u003c\/p\u003e\n\u003cp\u003eThe LS008G is ready for Makita's wireless-linked dust collection (AWS). With a wireless unit fitted, switching on the saw also starts the dust extractor, and a dust-collection button runs the extractor without turning the blade. AWS needs the Makita wireless unit WUT01 (part No. A-66151) fitted to the saw and a wireless-compatible Makita dust extractor; the wireless unit, the extractor and its hose are sold separately. The dust hose on the saw side is removable. The batteries, dust extractor and wireless unit shown in Makita's photos are sold separately.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Maker: Makita Corporation, Anjo, Aichi, Japan\u003cbr\u003e\n- Product: 190 mm cordless slide miter saw (Makita Japan category: 充電式スライドマルノコ)\u003cbr\u003e\n- Model code: LS008GZ (LS008G, body only)\u003cbr\u003e\n- JAN \/ UPC barcode: 088381773096\u003cbr\u003e\n- Battery platform: Makita 40Vmax lithium-ion, DC 36 V (Makita notes that 40Vmax is the battery voltage at full charge). Batteries Makita recommends for this model: BL4020, BL4025, BL4040, BL4040F; also usable: BL4050F, BL4080F, BL4080H. Not included\u003cbr\u003e\n- Chargers Makita lists for these batteries: DC40RA, DC40RB, DC40WA, DC40WB. Not included\u003cbr\u003e\n- In the box (LS008GZ, per Makita's manual and product page): Samehada tipped saw blade 190 mm, vertical vise, hex wrench 2.5, hex wrench 5, triangle ruler, dust bag. No battery, no charger\u003cbr\u003e\n- Included blade: Samehada Premium White tipped saw blade for table and slide saws, part No. A-74354: 190 mm, 65 teeth, body 1.4 mm, kerf 2.0 mm, bore 20 mm. Makita says the Samehada blade reduces friction by about a quarter and gives about 50% more work per charge than Makita's conventional tipped saw blade\u003cbr\u003e\n- Motor: DC brushless, with constant-speed control\u003cbr\u003e\n- Speed: 4,000 min-1 (rpm)\u003cbr\u003e\n- Blade: outer diameter 190 mm, bore 20 mm; usable blade diameter 180-190 mm\u003cbr\u003e\n- Cutting capacity, blade at 0 degrees (height x width, 190 mm blade): turn base 0 degrees, 62 x 312 mm (70 x 265 mm with a 25 mm backing board); turn base 45 degrees left or right, 62 x 220 mm (70 x 185 mm with a 20 mm backing board); turn base 57 degrees right, 62 x 170 mm (70 x 140 mm with a 15 mm backing board)\u003cbr\u003e\n- Cutting capacity, blade tilted 45 degrees left: turn base 0 degrees, 41 x 312 mm (47 x 265 mm with a 25 mm backing board); turn base 45 degrees left or right, 41 x 220 mm (47 x 185 mm with a 20 mm backing board)\u003cbr\u003e\n- Cutting capacity, blade tilted 45 degrees right: turn base 0 degrees, 24 x 312 mm (28 x 265 mm with a 25 mm backing board); turn base 45 degrees left or right, 24 x 220 mm (28 x 185 mm with a 20 mm backing board)\u003cbr\u003e\n- Turn base range: 0 to 47 degrees left, 0 to 57 degrees right\u003cbr\u003e\n- Blade tilt range: 0 to 45 degrees left and right; 46 degrees with the 46-degree switching lever\u003cbr\u003e\n- Slide poles: right side, 25 mm diameter\u003cbr\u003e\n- Dimensions: depth 649 mm x width 418 mm x height 507 mm\u003cbr\u003e\n- Weight: 11.3 kg without battery; 12.0 kg with BL4025; 12.3 kg with BL4040\u003cbr\u003e\n- Work per charge (Makita reference values; vary with blade condition, material and battery charge): Merapi 50 x 300 mm, about 115 cuts with BL4025 or about 195 cuts with BL4040; flooring 12 x 300 mm, about 270 cuts with BL4025 or about 435 cuts with BL4040\u003cbr\u003e\n- Functions listed by Makita: brushless motor, constant-speed control, laser for the marking line (movable to the left or right of the blade), LED light, electronic control, brake, dust bag and dust-extractor connection, wireless-linked dust collection (AWS) with a separately sold wireless unit, dust-collection button (with AWS only), sub table stored in the base\u003cbr\u003e\n- Wireless-linked dust collection: needs the Makita wireless unit WUT01 (A-66151) and a wireless-compatible Makita dust extractor, both sold separately. Makita gives an effective range of about 10 m, shorter with obstacles between saw and extractor\u003cbr\u003e\n- Optional Makita blades listed for this model: A-51611 (190 mm, 72 teeth, laminated and general wood), A-44909 (190 mm, 72 teeth, general wood), A-19803 (190 mm, 60 teeth, aluminium sash)\u003cbr\u003e\n- Source: Makita's LS008G product page, the LS008G \/ LS009G instruction manual, Makita's August 2022 LS008G release and the Makita general catalog (2026-7)\n\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eA slide miter saw crosscuts, miters and bevels boards held against its fence, with the motor head sliding on poles to reach wider stock. Within Makita's figures the LS008G cuts boards up to 312 mm wide and 62 mm thick with the blade square, and Makita quotes its work-per-charge figures on Merapi boards (50 x 300 mm) and flooring (12 x 300 mm). Stock wider than 312 mm, or thicker than 62 mm at full width, is outside Makita's stated capacity. Because the depth stays at 649 mm while the head slides, Makita says the saw can be used close to a wall, which it describes as useful on cramped work sites. Makita's manual says to cut only aluminium, wood or similar materials, to use only blades within the range on the rating plate (180-190 mm, so 165 mm blades are not for this model), and to hold the work with the vise. The included Samehada blade is Makita's blade for laminated and general wood; for aluminium sash Makita lists a separate blade, A-19803. The manual also states that battery adapters cannot be used with this saw, and that the saw should rest for 15 minutes or more when working continuously with spare batteries. This is the body-only version: a Makita 40Vmax lithium-ion battery and a charger have to be sourced before it can be run. Makita's instruction manual for this model is published in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47375888416931,"sku":"20261048","price":128680.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-190mm-cordless-slide-compound-miter-saw-40vmax-tool-only-ls008gz-5503537.jpg?v=1772500940"},{"product_id":"makita-10-8v-cordless-handy-saw-battery-charger-sold-separately-muc100dz","title":"Makita 10 8V Cordless Handy Saw  Battery\/Charger Sold Separately (MUC100DZ)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eCompact yet powerful, this handy cordless chainsaw is designed for pruning garden trees and fruit trees, as well as light woodworking. Its lightweight body and 100 mm guide bar let you work with the intuitive feel of a hand saw while enjoying fast, comfortable cutting performance from a high-power brushless motor.\u003c\/p\u003e\n\u003cp\u003eAutomatic chain oiling and automatic chain tension adjustment minimize downtime: the tool lubricates the chain for you, and tension is easily set by loosening and tightening the lever. A movable upper guard adjusts with cutting depth for added safety, while a hand guard helps protect your hand during operation. The slim 80TXL chain, 1.1 mm gauge and 0.325 pitch reduce cutting resistance and deliver sharp, quick cuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e DC 10.8 V slide-type Li-ion battery (battery and charger sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGuide bar length:\u003c\/strong\u003e 100 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChain speed:\u003c\/strong\u003e 480 m\/min\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChain type:\u003c\/strong\u003e 80TXL-26E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWork per charge (approx.):\u003c\/strong\u003e about 73 cuts in 50 mm softwood (reference value; varies with battery condition and work environment)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool dimensions:\u003c\/strong\u003e 383 mm (L) × 90 mm (W) × 220 mm (H), including chain, guide bar and battery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4 kg, including chain, guide bar and battery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Drip- and dust-resistant design helps reduce the impact of water and dust, but does not guarantee immunity to damage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47375888580771,"sku":"20261049","price":31480.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-10-8v-cordless-handy-saw-batterycharger-sold-separately-muc100dz-5687331.jpg?v=1772500937"},{"product_id":"makita-40v-max-cordless-jigsaw-jv002gz-battery-charger-case-not-included","title":"Makita 40V Max Cordless Jigsaw JV002GZ (Battery\/Charger\/Case Not Included)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThis 40Vmax cordless jigsaw delivers class‑leading cutting speed, powering through both thin and thick materials with ease. A wide base plate improves stability to reduce wobble during cuts, while the low‑vibration design uses a counter‑moving balance plate to offset vibration for smoother, more accurate operation and easier line‑of‑cut tracking.\u003c\/p\u003e\n\u003cp\u003eThe new Soft No‑Load function automatically lowers strokes per minute when not cutting to reduce noise and vibration, then instantly increases speed as soon as the blade contacts the material; after the cut it returns to low speed again. Tool‑less blade change lets you insert the blade directly into the clamp and remove it simply by opening the tool opener. A high‑brightness LED light offers three brightness levels via long‑press of the main power button and includes a memory function to recall the last setting.\u003c\/p\u003e\n\u003cp\u003ePowered by a 36V (40Vmax) slide‑type Li‑ion battery (battery and charger sold separately), this jigsaw offers cutting capacities of 135 mm in wood, 10 mm in mild steel, and 20 mm in aluminum, with bevel cuts up to 45° left and right. Stroke rate is 0–3,500 strokes\/min with a 26 mm stroke length, delivering approximately 516 cuts per charge in 300 x 12 mm plywood (with blade B‑10, orbital position 0). Tool dimensions are 272 x 84 x 208 mm and weight is 2.6 kg with BL4025 battery installed.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47375890088099,"sku":"20261054","price":45680.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-40v-max-cordless-jigsaw-jv002gz-batterychargercase-not-included-5520015.jpg?v=1772500932"},{"product_id":"makita-40vmax-cordless-reciprocating-saw-bare-tool-jr001gz","title":"Makita 40Vmax Cordless Reciprocating Saw (Bare Tool) JR001GZ","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eExperience outstanding cutting performance under heavy load with up to approx. 70% faster cutting speed (vs. Makita 18V x2 = 36V model when cutting 25A carbon steel pipe). A high‑power brushless motor and constant speed control help suppress speed drop under load, while the vertical crank design uses balancer rotation to apply firm pressure to the workpiece so the blade bites quickly and efficiently.\u003c\/p\u003e\n\u003cp\u003eBuilt for tough job sites, this reciprocating saw features a reinforced mechanism, rubber joint structure to reduce vibration transfer to the battery and terminals, a highly durable shoe, strong blade holding force, and IP56 protection against dust and water. The 36V (40Vmax) slide-type Li-ion battery system delivers powerful performance, and tool-less blade changes are as simple as turning the lever and inserting the blade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting capacity: Pipe up to 130 mm outer diameter; Wood up to 255 mm thickness (with 300 mm wood-cutting blade)\u003c\/li\u003e\n\u003cli\u003eWork volume per charge (approx., with BL4025, cutting): with BIM48 blade (optional) about 60 cuts in steel pipe (34 mm diameter x 3 mm thick); with BIM34 blade (optional) about 100 cuts in 2×10 lumber (38 mm thick x 235 mm long)\u003c\/li\u003e\n\u003cli\u003eDimensions: 457 mm (L) x 88 mm (W) x 233 mm (H)\u003c\/li\u003e\n\u003cli\u003eWeight: 4.2 kg (with BL4025 battery)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47381495283875,"sku":"20261129","price":45380.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-40vmax-cordless-reciprocating-saw-bare-tool-jr001gz-3723532.jpg?v=1772709090"},{"product_id":"makita-ks515dz-18v-125mm-dust-resistant-circular-saw-tool-only","title":"Makita KS515DZ 18V 125mm Cordless Dust-Collecting Circular Saw with Dust Box, 47mm Depth, Body Only (No Blade)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe KS515DZ is the body-only version of the KS515D, a 125 mm cordless dust-collecting circular saw made by Makita Corporation of Anjo, Aichi, Japan, for its 18 V lithium-ion range. Makita lists it under bōjin marunoko (防じんマルノコ), its Japanese category of circular saws built to collect cutting dust: the KS515D into its own dust box, the KS516D into a dust extractor. The KS515D is the dust-box type: a transparent dust box, fitted at the factory, covers the front of the blade to reduce dust scatter, and Makita states that the collection rate stays the same at shallow cutting depths. The box has a capped port; with the cap removed, a dust extractor hose can be connected. Its sister model, the KS516D, has a dust cover for use with a dust extractor only in place of the box. The KS515D has a brushless motor and automatic speed change: it runs in a high-speed mode (5,400 min-1) under light load and changes to a high-torque mode under heavy load, with a mode lamp that also warns of overload. Makita states a cutting speed about 20% higher than its previous model, measured on siding board 14 mm thick and 455 mm wide. Makita's balance diagram marks the centre of gravity, the brushless motor and the battery, and states that the saw can be held almost level; Makita presents this balance as improving cutting accuracy. The saw has AFT, which detects the sudden drop in speed caused by kickback and stops the saw; Makita notes that AFT does not prevent kickback itself. It also has APT, Makita's drip- and dust-protection design; Makita notes that it is designed to limit the effects of water and dust but is not guaranteed against failure caused by them. An LED light, a blower function and an electric brake complete Makita's feature list. The KS515DZ is supplied without saw blade, battery, charger or case.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Maker: Makita Corporation, Anjo, Aichi, Japan\u003cbr\u003e\n- Model code: KS515DZ (KS515D series, body only, dust-box type)\u003cbr\u003e\n- JAN \/ UPC barcode: 197050016829\u003cbr\u003e\n- Battery platform: Makita 18 V lithium-ion. Batteries listed in Makita's manual: BL1815N, BL1820B, BL1830B, BL1850B and BL1860B (sold separately). Makita's weight and work-per-charge figures use the BL1860B (6.0 Ah)\u003cbr\u003e\n- Chargers listed in Makita's manual (sold separately): DC18RC, DC18RD, DC18RF, DC18SD, DC18SF, DC18SH, DC18WC\u003cbr\u003e\n- In the box (KS515DZ, per Makita): dust box (fitted at the factory), parallel guide, hex wrench 5. No saw blade, battery, battery cover, charger or case\u003cbr\u003e\n- Motor: DC brushless\u003cbr\u003e\n- Speed: 5,400 min-1 (rpm), with automatic change between high-speed mode (light load) and high-torque mode (heavy load)\u003cbr\u003e\n- Mode lamp: off in high-speed mode, green in high-torque mode, flashing green when overloaded\u003cbr\u003e\n- Blade: outer diameter 125 mm, bore 20 mm (blade sold separately). Makita's manual says not to use blades with a root diameter of 104 mm or less\u003cbr\u003e\n- Maximum cutting depth: 47 mm at 0 degrees; 30 mm at 45 degrees\u003cbr\u003e\n- Bevel cutting: to the right, up to 45 degrees\u003cbr\u003e\n- Dimensions: length 267 mm x width 186 mm x height 245 mm, with BL1860B fitted\u003cbr\u003e\n- Weight: 2.8 kg with BL1860B fitted\u003cbr\u003e\n- Work per charge with BL1860B (Makita reference values; they vary with blade sharpness and material): about 245 sheets of siding board 14 mm thick x 455 mm wide; about 520 sheets of gypsum board 12 mm thick x 910 mm wide\u003cbr\u003e\n- Dust collection: factory-fitted dust box with a capped port for dust extractor connection. For extractor hoses of 19 mm or 38 mm diameter Makita lists hose joint 22-38 with front cuff 38; for 28 mm hoses, front cuff 22 (both sold separately)\u003cbr\u003e\n- Wireless-linked dust collection (AWS): supported with Makita's separately sold Wireless Unit WUT01 (part No. A-66151) and an AWS-compatible Makita dust extractor; Makita gives an effective range of about 10 m\u003cbr\u003e\n- Functions listed by Makita: brushless motor, automatic speed change with mode lamp, AFT (kickback reaction reduction), APT (drip and dust protection), LED light, blower, electric brake\u003cbr\u003e\n- Separately sold parts listed by Makita: dust cover set 122A85-3 (the KS516D's cover; box and cover are interchangeable), large dust box assembly 122K52-8 (about three times the capacity of the standard box), base plate set A-72899 (reduces friction between the saw and the material), two-pole parallel guide 122871-6, guide rule holder set 191U59-5, hook set 191U56-1\u003cbr\u003e\n- 125 mm blades with 20 mm bore that Makita lists for its dust-collecting circular saws: blades for ceramic siding, hard ceramic siding, gypsum board, galvalume steel sheet, enamel and melamine laminate, all-diamond blades, and Samehada Premium White blades for general wood, A-67175 (35 teeth) and A-71700 (45 teeth)\u003cbr\u003e\n- Source: Makita's KS515D product page (read October 2026), the KS515D\/KS516D instruction manual and the KS515D\/KS516D leaflet (contents as of July 2026)\n\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eThe KS515D is a hand-held 125 mm circular saw. Makita presents it for cutting siding board, gives its work-per-charge figures for siding board and gypsum board, and describes its 47 mm maximum cutting depth as suited to cutting laminated timber and plywood, including renovation work. Fit a 125 mm blade with a 20 mm bore that is made for the material being cut; Makita's list for its dust-collecting saws is given above, and the KS515DZ includes no blade. The dust box collects dust without an extractor. For longer runs Makita offers a large dust box, or the cap can be removed to connect a dust extractor, which the separately sold wireless unit can start together with the saw when the extractor is AWS-compatible. Makita notes that some of its product photos show the dust-cover model, and that hoses, blades, dust extractors and accessories shown in them are sold separately. This is the body-only version: a Makita 18 V lithium-ion battery, a charger and a blade have to be sourced before the saw can be used. Makita's instruction manual for this model is published in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":48081713463459,"sku":"20269635","price":50280.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-ks515dz-18v-125mm-dust-resistant-circular-saw-tool-only-7617193.png?v=1788548956"},{"product_id":"makita-ks516dz-18v-125mm-dust-resistant-circular-saw-tool-only","title":"Makita KS516DZ 18V 125mm Cordless Dust-Collecting Circular Saw for Dust Extractors, Body Only (Blade Sold Separately)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe KS516DZ is the body-only version of the KS516D, a 125 mm cordless dust-collecting circular saw (Makita's category 充電式防じんマルノコ) made by Makita Corporation of Anjo, Aichi, Japan, for its 18V lithium-ion range. Makita supplies the KS516D with a dust cover made only for connection to a dust extractor. Its sister model, the KS515D, comes with a dust box that collects dust without an extractor. Makita states that the dust box and the dust cover are interchangeable, and each is also sold separately. The KS516DZ comes without battery, charger, case or saw blade.\u003c\/p\u003e\n\u003cp\u003eMakita lists these features for the KS516D: what Makita calls a high-power brushless motor; automatic speed change according to cutting load, from a high-speed mode (5,400 min-1) under light load to a high-torque mode under heavy load, with a mode lamp that also warns of overload; AFT, which detects the sudden drop in speed when kickback occurs and stops the saw (Makita notes that this function does not prevent kickback itself); APT drip and dust resistance (Makita notes that the saw is designed to limit the effects of water and dust, but this does not guarantee it will not fail because of them); and wireless-linked dust collection (AWS) with separately sold parts. It also has an LED light, an electric brake, soft start and a blower function. The dust cover covers the front of the blade to reduce dust scatter, and Makita says the collection rate does not change at shallow cutting depths. Makita states a cutting speed about 20% higher than its previous model, measured on siding board 14 mm thick and 455 mm wide.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Maker: Makita Corporation, Anjo, Aichi, Japan\u003cbr\u003e\n- Product: 125 mm cordless dust-collecting circular saw, dust-cover type for dust extractor connection\u003cbr\u003e\n- Model code: KS516DZ (KS516D series, body only)\u003cbr\u003e\n- JAN: 197050016843\u003cbr\u003e\n- Voltage: 18 V DC (Makita 18V lithium-ion)\u003cbr\u003e\n- Motor: DC brushless\u003cbr\u003e\n- Speed: 5,400 min-1 (rpm), with automatic change between high-speed mode and high-torque mode according to cutting load\u003cbr\u003e\n- Blade size: outer diameter 125 mm, bore 20 mm (blade not included)\u003cbr\u003e\n- Maximum cutting depth: 47 mm at 0 degrees; 30 mm at 45 degrees right\u003cbr\u003e\n- Bevel cutting: up to 45 degrees to the right\u003cbr\u003e\n- Dust collection: dust cover for dust extractor connection only, fitted at the factory. An extractor hose of 19 mm or 38 mm diameter fits the dust nozzle directly; a 28 mm hose fits with front cuff 38\u003cbr\u003e\n- Wireless-linked dust collection (AWS): supported with separately sold parts, the Makita wireless unit WUT01 (part No. A-66151) and a wireless-compatible Makita dust extractor\u003cbr\u003e\n- Dimensions: length 256 mm x width 184 mm x height 248 mm, with BL1860B battery fitted\u003cbr\u003e\n- Weight: 2.7 kg with BL1860B battery fitted\u003cbr\u003e\n- Work per charge (Makita reference values with BL1860B): about 245 sheets of siding board 14 mm thick x 455 mm wide; about 520 sheets of gypsum board 12 mm thick x 910 mm wide. Makita notes that results vary with blade sharpness and material\u003cbr\u003e\n- Functions listed by Makita: brushless motor, automatic speed change, mode lamp with overload warning, AFT, APT, AWS (with separately sold parts), LED light, electric brake, soft start, blower\u003cbr\u003e\n- In the box (KS516DZ, per Makita's manual): parallel guide, hex wrench 5, dust cover (fitted to the saw). No battery, charger, battery cover, case or saw blade\u003cbr\u003e\n- Batteries listed by Makita for this model (sold separately): BL1815N (1.5 Ah), BL1820B (2.0 Ah), BL1830B (3.0 Ah), BL1850B (5.0 Ah), BL1860B (6.0 Ah)\u003cbr\u003e\n- Chargers listed by Makita (sold separately): DC18RC, DC18RD, DC18RF, DC18SD, DC18SF, DC18SH, DC18WC\u003cbr\u003e\n- Optional Makita parts: dust box set 122K51-0 (standard on the KS515D); large dust box assembly 122K52-8 (Makita: 3 times the capacity of 122K51-0); dust cover set 122A85-3; base plate set A-72899; 2-pole parallel guide 122871-6; guide rule holder set 191U59-5; hook set 191U56-1\u003cbr\u003e\n- Condition: New\u003cbr\u003e\n- Source: Makita's KS516D product page, the KS515D\/KS516D instruction manual and Makita's KS515D\/KS516D leaflet\n\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eMakita presents the KS516D for high-speed cutting of siding board, gives its work-per-charge figures on siding board and gypsum board, and says the 47 mm maximum depth suits laminated timber and plywood, including renovation work. The dust cover is made for use with a dust extractor: connect a 19 mm or 38 mm extractor hose directly to the dust nozzle, or a 28 mm hose with front cuff 38. Makita's catalog describes a dust-only extractor as essential for cutting gypsum board and siding.\u003c\/p\u003e\n\u003cp\u003eFor wireless-linked dust collection, fit the separately sold wireless unit WUT01 (A-66151) to the saw and register it with an AWS-compatible Makita dust extractor. The extractor then starts when the saw is switched on; Makita gives an effective range of about 10 m. To collect dust without an extractor, the dust cover can be replaced with Makita's separately sold dust box set 122K51-0.\u003c\/p\u003e\n\u003cp\u003eThe saw blade is not included. Makita's KS515D\/KS516D leaflet lists 125 mm blades with a 20 mm bore for these saws, including blades for ceramic siding, hard ceramic siding, gypsum board, Galvalume steel sheet, enamel and melamine board, all-diamond blades, and the Samehada Premium White blades A-67175 (35 teeth) and A-71700 (45 teeth) for general wood. This is the body-only version: a Makita 18V lithium-ion battery and a charger are needed to run it. Makita publishes the instruction manual for this model in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":48081717526691,"sku":"20269637","price":49380.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-ks516dz-18v-125mm-dust-resistant-circular-saw-tool-only-5268944.png?v=1788548955"},{"product_id":"マキタ-充電式マルノコ-hs610dz","title":"Makita HS610DZ 18V 165mm Cordless Circular Saw, 57mm Cut Depth, Body Only (Battery, Charger and Case Sold Separately)","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Makita HS610DZ is the body-only version of the HS610D, a 165 mm cordless circular saw in Makita's 18V lithium-ion range. Makita Corporation has its head office in Anjo, Aichi, Japan. The HS610DZ comes without battery, charger, battery cover or case. Makita's catalog labels the HS610D its compact model, and Makita's product page describes it as compact and easy to handle, with high power equal to an AC model and a speed of 5,000 rpm (Makita's comparison with its own AC 100 V model). It has a brushless motor that switches automatically between a high-speed mode and a high-torque mode, a mode lamp that also flashes as an overload warning, a battery level indicator, an LED light, a brake, soft start and an aluminium base. It is supplied with Makita's Samehada Premium White tipped saw blade (165 mm, 45 teeth, part No. A-64353). Makita states that the Samehada blade lowers friction resistance by about 1\/4 and, on a cordless circular saw, gives about 50 percent more work per charge than Makita's conventional Laser Double Slit blade A-48533. The HS610D does not have wireless-linked dust collection (AWS): Makita offers that function only on the sister model HS611D, and the wireless unit fits the HS611D only.\u003c\/p\u003e\n\u003ch2\u003eProduct Specification\u003c\/h2\u003e\n\u003cp\u003e\n- Maker: Makita Corporation (head office: Anjo, Aichi, Japan)\u003cbr\u003e\n- Product: Makita cordless circular saw HS610DZ (HS610D series, body only, blue)\u003cbr\u003e\n- JAN: 088381869461\u003cbr\u003e\n- Battery platform: Makita 18V slide-type lithium-ion. Makita's specification table lists BL1860B (6.0 Ah); Makita's manual lists BL1815N, BL1820B, BL1830B, BL1850B and BL1860B as separately sold batteries. Makita states that battery adapters cannot be used with this model\u003cbr\u003e\n- In the box (HS610DZ, per Makita): Samehada Premium White tipped saw blade A-64353, hex wrench 5, parallel guide. No battery, charger, battery cover or case\u003cbr\u003e\n- Motor: DC brushless\u003cbr\u003e\n- Speed: 5,000 min-1 (rpm)\u003cbr\u003e\n- Blade: outer diameter 165 mm, bore 20 mm; usable blade diameter 155-165 mm\u003cbr\u003e\n- Maximum cutting depth: 57 mm at 90 degrees; 41 mm at 45 degrees; 46.5 mm at 5 degrees left\u003cbr\u003e\n- Bevel range: 0-45 degrees right and 0-5 degrees left\u003cbr\u003e\n- Wireless-linked dust collection (AWS): not available on this model (HS611D only)\u003cbr\u003e\n- Dust extraction: connects to a Makita dust extractor with the separately sold dust nozzle set (part No. 196995-4)\u003cbr\u003e\n- Dimensions: length 267 mm x width 178 mm x height 250 mm, with battery\u003cbr\u003e\n- Weight: 3.0 kg with battery\u003cbr\u003e\n- Work per charge (Makita reference values; Makita notes they vary with battery charge, working conditions, blade sharpness and material): about 195 cuts in Douglas fir 50 x 300 mm (Makita product page and catalog); about 140 cuts in Merapi 50 x 300 mm with BL1860B (Makita instruction manual)\u003cbr\u003e\n- Functions listed by Makita: brushless motor, automatic mode change with mode lamp and overload warning, battery level indicator, LED light, brake, soft start\u003cbr\u003e\n- Charger listed in Makita's manual for this model: DC18RF (not included)\u003cbr\u003e\n- Other 165 mm Makita blades listed for this model: A-64369 (Samehada, 55 teeth), A-49367 (52 teeth), A-55821 (55 teeth), A-55809 (72 teeth) and others in Makita's manual\u003cbr\u003e\n- Sources: Makita's HS610D product page, the HS610D\/HS611D instruction manual and the Makita general catalog (2026-7)\n\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eThe HS610D is a hand-held circular saw, and its included Samehada blade is Makita's blade for laminated timber and general wood. By Makita's figures it cuts up to 57 mm deep with the blade square and 41 mm at a 45-degree bevel, and Makita quotes its work-per-charge figures on 50 x 300 mm boards. Material thicker than 57 mm cannot be cut through in one pass; Makita's 165 mm saws with a 66 mm maximum depth include the 18V HS631D and the 40Vmax HS002G. The saw does not start a dust extractor wirelessly; Makita offers that function on the HS611D. This is the body-only version: a Makita 18V slide-type lithium-ion battery and a charger are needed before it can be used. Makita's instruction manual for this model is published in Japanese.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":48082865324195,"sku":"20269658","price":38780.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-18v-165mm-cordless-circular-saw-hs610dz-battery-charger-case-sold-separately-3684487.png?v=1788548951"},{"product_id":"makita-pb003gz-40v-max-66mm-cordless-portable-band-saw-tool-only","title":"Makita PB003GZ 40V Max 66mm Cordless Portable Band Saw Tool Only","description":"\u003ch2\u003eMakita PB003GZ 40V Max 66mm Cordless Portable Band Saw Tool Only\u003c\/h2\u003e\u003cp\u003eA brushless portable band saw for metal pipe and section cutting. Its adjustable stopper plate and variable blade speed help match the tool to different cutting tasks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTool only. Battery and charger are not included. Carrying case is not included.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Makita\u003c\/li\u003e\n\u003cli\u003eModel: PB003GZ\u003c\/li\u003e\n\u003cli\u003eBattery platform: 40V Max\u003c\/li\u003e\n\u003cli\u003eBlade size: 835 x 13 x 0.5 mm\u003c\/li\u003e\n\u003cli\u003eBlade speed: 1.3–3.2 m\/s\u003c\/li\u003e\n\u003cli\u003eMaximum round pipe capacity: 66 mm\u003c\/li\u003e\n\u003cli\u003eMaximum square pipe capacity: 66 x 66 mm\u003c\/li\u003e\n\u003cli\u003eIncluded accessories: Saw blade (BIM 18 TPI), hex wrench 4 and side grip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eJapanese-market model. Please confirm battery-platform compatibility before purchase. Batteries and accessories shown in use are for illustration and are not included unless listed above.\u003c\/p\u003e\u003cp\u003e40V Max denotes battery voltage at full charge; nominal DC voltage is 36V. No mains charger is supplied.\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":48112296362147,"sku":"2026A0A6","price":47500.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/makita-pb003gz-40v-max-66mm-cordless-portable-band-saw-tool-only-6675087.jpg?v=1789193778"},{"product_id":"takagi-l-type-cutter-saw-2-way-hand-saw-and-utility-cutter","title":"Takagi L-Type Cutter Saw 2-Way Hand Saw and Utility Cutter","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Takagi L-Type Cutter Saw is a 2-way cutting tool that combines a saw and cutter for everyday cutting tasks. It is intended for hobby use and light gardening work.\u003c\/p\u003e\u003cp\u003eThe saw blade is suitable for general wood, laminated wood, plywood, plastic, PVC pipe, and bamboo. The cutter blade is suitable for paper, cloth wallpaper, and cardboard. The saw and cutter blades are made in Japan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Approx. 18 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 112 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade material:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle material:\u003c\/strong\u003e ABS resin and TPR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Takagi","offers":[{"title":"Default Title","offer_id":67626563567779,"sku":"2026A110","price":1480.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/takagi-l-type-cutter-saw-2-way-hand-saw-and-utility-cutter-1125322.jpg?v=1791350533"},{"product_id":"takagi-recycle-double-saw-yellow-green","title":"Takagi Recycle Double Saw Yellow Green","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThis double saw has two blade types on the front and back: one for wood and plastic, and one for general metal. It is designed for tasks such as dismantling bulky waste, gardening, camping, and outdoor use.\u003c\/p\u003e\u003cp\u003eThe wood and plastic blade is for cedar, pine, magnolia, lauan, balsa, plywood, plastic, PVC, and bamboo. The general metal blade is for curtain rails, stainless-clad pipe, new building materials, plastic, steel, thin steel plate, and non-ferrous metals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e Approx. 18 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 116 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade material:\u003c\/strong\u003e Carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle material:\u003c\/strong\u003e ABS resin and TPR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Takagi","offers":[{"title":"Default Title","offer_id":67626569236643,"sku":"2026A111","price":1880.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/takagi-recycle-double-saw-yellow-green-1550221.jpg?v=1791350533"},{"product_id":"silky-bigboy-2000-356-36-folding-pruning-saw-360mm","title":"Silky BIGBOY 2000 356-36 Folding Pruning Saw 360mm","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Silky BIGBOY 2000 356-36 is a folding pruning and felling saw with a curved 360 mm blade. The extra-large teeth have a pitch of 6.5 teeth per 30 mm.\u003c\/p\u003e\u003cp\u003eThis product has a sharp blade. Take appropriate safety precautions, including wearing gloves during use and blade replacement.\u003c\/p\u003e\u003ch2\u003eProduct Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: 356-36\u003c\/li\u003e\n\u003cli\u003eBlade length: 360 mm\u003c\/li\u003e\n\u003cli\u003eTooth pitch: 6.5 teeth per 30 mm\u003c\/li\u003e\n\u003cli\u003eCut width: 1.4 mm\u003c\/li\u003e\n\u003cli\u003eFolded dimensions: 405 x 80 x 20 mm\u003c\/li\u003e\n\u003cli\u003eOpen dimensions: 775 x 90 x 20 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 420 g\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Silky","offers":[{"title":"Default Title","offer_id":67958080045219,"sku":"2026A1SB","price":5800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/silky-bigboy-2000-356-36-folding-pruning-saw-360mm-2598235.jpg?v=1794666972"},{"product_id":"gyokucho-razorsaw-1151-double-edge-flush-cut-saw-125-mm-with-wood-handle","title":"Gyokucho Razorsaw 1151 Double Edge Flush Cut Saw 125 mm with Wood Handle","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Gyokucho Razorsaw 1151 is a compact double-edge flush cutting saw for detailed woodwork and cutting dowels. Its wooden handle and 125 mm blade have two different tooth pitches for different tasks. The blade is not replaceable.\u003c\/p\u003e\u003cp\u003eCheck the material for nails or other metal before cutting and do not apply excessive force. Do not touch the sharp edge with bare hands or allow children to play with it. Store safely after use. California warning: This product can expose you to lead, nickel and chromium, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.\u003c\/p\u003e\u003ch2\u003eProduct Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: 1151\u003c\/li\u003e\n\u003cli\u003eBlade length: 125 mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.3 mm\u003c\/li\u003e\n\u003cli\u003eTooth pitches: 1.0 mm and 1.3 mm\u003c\/li\u003e\n\u003cli\u003eHandle material: Wood\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 saw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":67959177707683,"sku":"2026A1TS","price":2260.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/gyokucho-razorsaw-1151-double-edge-flush-cut-saw-125-mm-with-wood-handle-3409382.jpg?v=1794774967"},{"product_id":"nakaya-d-210c-kumiko-dozuki-crosscut-saw-210-mm-with-handle","title":"Nakaya D-210C Kumiko Dozuki Crosscut Saw 210 mm with Handle","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Nakaya D-210C is a Japanese dozuki saw for precise cuts in wood and kumiko work. The complete saw has a 210 mm replaceable blade and a wooden handle.\u003c\/p\u003e\u003cp\u003eSecure the wood on a stable surface before cutting; the maximum cutting thickness is 42 mm. Make sure the surroundings are safe, wear protective equipment, and never swing the saw or point it at anyone. Before use, check that the blade is securely fixed to the handle. Do not use it if damaged or loose, or if looseness cannot be corrected. Do not use excessive force or twist the blade.\u003c\/p\u003e\u003cp\u003eAfter use, remove sawdust with a toothbrush or similar brush, apply rust-preventive oil and return the saw to its vinyl case. Keep it out of the reach of children. Read the instructions on the reverse carefully and replace the blade safely.\u003c\/p\u003e\u003ch2\u003eProduct Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: D-210C\u003c\/li\u003e\n\u003cli\u003eBlade length: 210 mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.2 mm\u003c\/li\u003e\n\u003cli\u003eKerf width: 0.3 mm\u003c\/li\u003e\n\u003cli\u003eMaximum cutting thickness: 42 mm\u003c\/li\u003e\n\u003cli\u003eBlade material: Swedish steel\u003c\/li\u003e\n\u003cli\u003eHandle material: Wood\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 saw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nakaya","offers":[{"title":"Default Title","offer_id":67959393321123,"sku":"2026A1TZ","price":7220.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/nakaya-d-210c-kumiko-dozuki-crosscut-saw-210-mm-with-handle-3276477.jpg?v=1794774967"},{"product_id":"nakaya-d-150c-mini-precision-kumiko-dozuki-saw-150mm","title":"Nakaya D-150C Mini Precision Kumiko Dozuki Saw 150mm","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Nakaya D-150C is a mini precision dozuki saw for fine woodworking and kumiko joinery. This complete saw has a replaceable 150 mm blade.\u003c\/p\u003e\u003cp\u003eThe 0.2 mm thick blade produces a kerf approximately 0.3 mm wide. The saw is intended for precision cutting of wood, including work on furniture, fittings, musical instruments and fishing rods.\u003c\/p\u003e\u003ch2\u003eProduct Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: D-150C\u003c\/li\u003e\n\u003cli\u003eBlade length: 150 mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.2 mm\u003c\/li\u003e\n\u003cli\u003eKerf: Approximately 0.3 mm\u003c\/li\u003e\n\u003cli\u003eMaximum cutting depth: 38 mm\u003c\/li\u003e\n\u003cli\u003eBlade: Replaceable\u003c\/li\u003e\n\u003cli\u003eContents: 1 complete saw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nakaya","offers":[{"title":"Default Title","offer_id":67959599628451,"sku":"2026A1U4","price":4910.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/nakaya-d-150c-mini-precision-kumiko-dozuki-saw-150mm-7617301.jpg?v=1794774967"},{"product_id":"nakaya-onigatana-kr-300-double-edge-ryoba-saw-300-mm-with-handle","title":"Nakaya Onigatana KR-300 Double Edge Ryoba Saw 300 mm with Handle","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Nakaya Onigatana KR-300 is a double-edge Japanese hand saw for general wood cutting. The 300 mm blade is heat treated and hard chrome plated, and can be replaced when needed. This listing includes the saw and handle, not a replacement blade alone.\u003c\/p\u003e\u003cp\u003eThe product image is representative of the series.\u003c\/p\u003e\u003ch2\u003eProduct Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: KR-300\u003c\/li\u003e\n\u003cli\u003eBlade length: 300 mm\u003c\/li\u003e\n\u003cli\u003eOverall length: Approximately 720 mm\u003c\/li\u003e\n\u003cli\u003eSaw weight: Approximately 235 g\u003c\/li\u003e\n\u003cli\u003eBlade finish: Hard chrome plated\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 saw with handle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nakaya","offers":[{"title":"Default Title","offer_id":67960172642467,"sku":"2026A1VE","price":11500.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/nakaya-onigatana-kr-300-double-edge-ryoba-saw-300-mm-with-handle-8829527.jpg?v=1794774859"},{"product_id":"nakaya-d-210r-kumiko-dozuki-rip-cut-saw-210mm-with-handle","title":"Nakaya D-210R Kumiko Dozuki Rip Cut Saw 210mm with Handle","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\u003cp\u003eThe Nakaya D-210R is a Japanese dozuki saw for precise rip cuts along wood grain. Its fine 210 mm blade is designed for joinery, furniture and other detailed woodworking.\u003c\/p\u003e\u003cp\u003eThis listing contains one saw with a handle and a replaceable blade. Replacement blades are sold separately.\u003c\/p\u003e\u003ch2\u003eProduct Specification\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: D-210R\u003c\/li\u003e\n\u003cli\u003eCut type: Rip cut\u003c\/li\u003e\n\u003cli\u003eBlade length: 210 mm\u003c\/li\u003e\n\u003cli\u003eBlade thickness: 0.2 mm\u003c\/li\u003e\n\u003cli\u003eKerf width: 0.3 mm\u003c\/li\u003e\n\u003cli\u003eTeeth: 22 per 30 mm\u003c\/li\u003e\n\u003cli\u003eMaximum cutting depth: 42 mm\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 saw with handle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nakaya","offers":[{"title":"Default Title","offer_id":67961535987875,"sku":"2026A1XU","price":7510.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/files\/nakaya-d-210r-kumiko-dozuki-rip-cut-saw-210mm-with-handle-2356030.png?v=1794774672"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0590\/1271\/0563\/collections\/makita-cordless-slide-miter-saw-18v-165mm-blade-182mm-cut-width-ls610dz-8719570.jpg?v=1794931983","url":"https:\/\/wafuu.com\/collections\/saws.oembed","provider":"WAFUU JAPAN","version":"1.0","type":"link"}